|
|
|
"Robinson" Shutter engineered in Search of Excellence
34 mm hollow slats create a superior heavy duty shutter which is exceptionally easy to operate and the most advanced of designs.
Application: Specified Australia-wide for State Emergency Service Vehicles, Fire Fighting Vehicles, and other applications where strength and weather resistance is required. Top, Bottom, Side seals and unique lift bar bottom rail are usually standard requirements.
RECOMMENDED SPECIFICATIONS
Series 34 Aluminium Truck Shutter, as manufactured by Mirage Industries Pty,
Ltd., Australia.
Product Code AE/ROB/34.
SIZES
A single door is available to suit an opening up to 2.2 metres high by 1.9 metres wide.
STANDARD CURTAIN
Made of double skin aluminium extruded slats. Each slat has a flat face of 34mm and
each skin is 1.2mm thick. In between each slat is a nylon/P.V.C. co-extrusion which is
inserted so as to create a weather seal and to eliminate rattling. Both ends of every
aluminium slat are fitted with a solid interlocking nylon clip that secures slats
laterally and takes up wear. When assembled these slats create a modern flat surface
perfect for sign writing.
BRACKET OPTIONS
All bracket styles have the channel guide pre-fixed for smooth operation and ease of
installation.
Fixed Position Front Roll
Bracket - The most basic and simple design. The top slat is bolted directly to the
drum.
Pennant Plate Front Roll
Bracket - The drum slides in the bracket to provide minimum clearance from the header
plate at all times. The top slat is bolted directly to the drum.
Minimum Radius Front Roll
Bracket - Designed to take up the minimum amount of headroom. The top slat of the
curtain is connected to the drum via cables.
Roof and Rear Roll Bracket - The drum is mounted in a fixed position to the rear of the roof cavity. The top slat of the curtain is connected to the drum via cables.
Roof Cable Front Roll
Bracket - The drum is mounted in a fixed position. Bottom rail of the curtain
is connected to the drum via cables.
ROLLER DRUM
The drum is manufactured from 100mm diameter extruded aluminium tube, solid nylon end
caps and a solid steel shaft. Helical oil tempered springs are completely concealed and
supplied pre-tensioned for fast installation.
CHANNEL GUIDES
1.6mm thick folded ZincalumeŽ (22mm deep x 23mm wide).
BOTTOM RAIL
The bottom rail is extruded aluminium section fitted with a rear aluminium cover plate
designed to cover the locking device. It comes standard with heavy duty finger pull
extrusion, nylon end shoes and rubber seal. Stop brackets bolted to the inside of the
bottom rail eliminate damage to header plate.
LOCKING OPTIONS
►Flush Fitting Key Lock
►"T" Handle
-
Key locking or non-locking.
►Slam "T" Handle
- Key locking or non-locking.
►Lift Bar Rail -
Incorporating flush key locking or non-locking.
SEAL OPTIONS
Small Top Seal -
Anodised aluminium extrusion incorporating 113mm brush.
Heavy Duty Top Seal
- Anodised aluminium "J" gutter extrusion incorporating brush seal in 13mm, 25mm
or 34mm.
Side Seal - Aluminium
extrusion incorporating rubber side seal.
FINISH
Available in mill finish, hand polished, matt natural, anodised and a range of
powdercoated colours.