|
|
FIRE-RESISTANT ROLLER SHUTTER 2, 3 OR 4 HOUR
Designed, Built and Tested in Australia
(Certified in Accordance with Australian Standard 1530 [Part 4 - 2005 and Part 2 - 2005]
FEATURES
Certified Integrity up to 4 hours
Mechanism exposed to 1200ºC
Interlocking steel slats,
100 x 1.0mm
Sizes up to 40m²(refer below for details on size limitations)
Controlled descent mechanism
Sealed bearing drum assembly
BENEFITS
Maximum protection of your assets
No failure even at 240 minutes
Provides security and strength
Allows large vehicle access
No inadvertent activation
Hoist control ensures complete closure
Withstands harsh environments
RECOMMENDED SPECIFICATIONS
Steel Roller Shutter, 4-hour fire rated, as manufactured by Mirage
Industries Pty. Ltd., Australia. Product Code SR/FS/100.
CURTAIN
Constructed from interlocking, galvanised, steel roll-formed slats,
100mm x 1.0mm with cast iron end clips fixed with rivets.
ROLLER DRUM ASSEMBLY
A robust, seamless mild steel tube, 168mm O.D. x 5mm wall. A
mild steel shaft 42mm x 4.0mm with sealed bearings is incorporated. These are
self-aligning. The axle is fixed through 10mm mild steel brackets mounted to
75mm x 75mm x 8mm steel angles.
BOTTOM RAILS AND
GUIDES
The bottom rail comprises 50mm x 50mm x 4mm Duragal steel
angles, mounted back-to-back of the bottom slat. Vertical guides are
manufactured from galvanised, roll-formed mild steel 100mm x 48mm x 23mm thick
"U" channel. Fixing is by 40mm x 8mm mild steel fixing lugs, spaced at
700mm centres.
OPERATION AND GEARBOX
By hand chain through a reduction gearbox mounted onto one end
of the drum. The reduction gearbox incorporates a manual fire door
hoist-controlled descent mechanism and a fusible link rated at 80ºC.
Limitations are as follows:
#Manual operation by hand-maximum 2000mm wide x 2000mm high
#Chain operation - maximum 8000mm wide x 7000mm high, to an overall maximum of 22.0m²
#Electric operation 1 h.p. 3 phase - maximum 8000mm wide x 7000mm high, to an overall maximum of 32.0m²
#Electric operation 1.5 h.p. 3 phase -maximum 8000mm wide x7000mm high, to an overall maximum of 40.0m²
ORIENTATION
OPTIONAL EXTRAS
The Test Door covered by CERTIFICATE OF TEST 1041 was tested
with the drum and descent limiting gear exposed to the fire.
The Standard is AS 1530.4-2005.
SIZES
OPINION NUMBER FCO - 1832, issued by the CSIRO on 11 May 2005 to MIRAGE
conditionally permits sizes up to 8000mm wide x 7000mm high,to a maximum of 40m² overall
The OPINION refers
exclusively to the performance conditions of the roller shutter door system if
it were subject to fire test according to AS 1530.4-2005.
►MOTORISATION via an approved 3-phase motor.